| Especificación |
HSE 75mm Extrusora de Alta Velocidad para Hoja PET / PP |
| Material |
PP; PET and Other Rigid Sheet Polymers |
| Power Consumption |
IR Ceramic Efficient for Energy Saving;
~0.26kWh per kilo Power Consumption |
| Layers |
Single Extrusion Mono Layer or Co-extrusion Multi Layers |
| Production |
Sheet Cut; Reel Wind; In-line with Thermoforming Machine |
| Thickness |
PP: 0.3mm ~ 2mm; PET: 0.15mm~1.2mm |
| Width |
500 ~ 1,600mm |
| Screw Dia |
75mm |
| Maximum Screw Revolution |
1000 RPM |
| Maximum Output |
900 kg/h +/- 10% for PP; 1200 kg/h +/- 10% for PET |
| Line Speed |
Up to 60M/Min. |
| Cooling Rolls Stack |
Down stack or Up stack configuration |
| Cooling Rolls Stack. |
Down stack or Up stack configuration
Vertical, Inclined or Horizontal,
J Type, 3rd Roll Rotating type & Multiple Contact type for High Performance Requirements
|
| Slitting |
Razor Blades, Rotating Blades |
| Winder |
Fixed Shaft; Cantilever; Automatic Cut and changeover Turret Winder |
| Drive System |
CMG Drive with Hallow Shaft Design for Screw Extraction from Back Side |
