Português        Español        English        Русский        Home
昇威機械股份有限公司 - 塑膠押出與成型系統
Sunwell » 產品系列 » EPE 發泡管、套角押出機系列
 

EPE 發泡管、套角押出機系列

 

EPE 發泡管、套角押出機系列


MODEL FEX65 FEX75 FEX90
Material LDPE LDPE LDPE
Sleeve internal dia. 12~75mm 12~100mm 12~120mm
Sleeve wall thickness 6; 10; 15; 20; 25; 30mm 6; 10; 15; 20; 25; 30mm 6; 10; 15; 20; 25; 30mm
Rod Dia. / Up to 75mm Up to 90mm
Sheet Thickness EPE: 0.8~ 6mm EPE: 0.8~ 6mm EPE: 0.8~ 6mm
Net mesh Single or double Single or double /
Net Throughput 10~30 kg/hr 15~40 kg/hr /
Sheet Width 1,000mm 1000~1,500mm 1000~1,500mm
Sheet Throughput 40 kg/hr 60 kg/hr 100 kg/hr
Density 22~30 kg/M3 22~30 kg/M3 22~30 kg/M3
Extruder Type Long Single Long Single Long Single
Screw dia. 65mm 75mm 90mm
L/D 52/1 52/1 52/1
Blowing agent Duplex or Triple Diaphragm Pump - Hydrocarbon Duplex or Triple Diaphragm Pump - Hydrocarbon Duplex or Triple Diaphragm Pump - Hydrocarbon
Drive System SIEMENS AC drive with FLENDER gearbox or equivalent SIEMENS AC drive with FLENDER gearbox or equivalent SIEMENS AC drive with FLENDER gearbox or equivalent
Cooling system Air cool combined with
Proportional motorized water cool
Air cool combined with
Proportional motorized water cool
Air cool combined with
Proportional motorized water cool
Space requirement 10(L) x 3(W) x 4(H) m 12(L) x 3(W) x 4(H) m 15(L) x 3(W) x 4(H) m

 

Back to Top

Sitemap | Contact
EPS / EPE 發泡片材押出機系列 EPE 發泡管、套角押出機系列 XPS 發泡隔熱板押出機系列 HIPS / PP / APET 膠片押出機系列 HSE 75mm PET/PP 高速押出機 真壓空成型裁斷機系列 模內裁斷熱成型系統 熱板式壓空成型系統 EPS 蒸氣熱注發泡杯系統 EPS / EPE 回收製粒機系列 紙杯成型機 模具 其它附屬設備