高速型塑膠片材押出機

膠片押出機 (中空軸設計,伺服馬達及載力最佳化)

  • 材質:PP,PET和其他剛性片狀聚合物
  • 材料厚度:0.3-1.2毫米 (詳細信息請參閱規格)
  • 產量:900-1200 kg / hr (詳細信息請參閱規格)
型號:
HSE 75mm PET/PP High Speed Extruder

特色

昇威國際HSE高速押出機,高速生產塑膠片材:PP片材每小時生產900kg; PET片材每小時生產1200kg。馬達控制系統扭矩為1,000rpm空心軸設計,螺桿可從尾端取出。
常規的加熱元件為紅外線陶瓷加熱片並搭配鼓風機。高速押出機經過多次修正與改善後,性能更為穩定。與常規的押出機系統比較,更能提高節能、高產量、平整度、表面光滑、內部應力減少及高透明度。

規格

PP Extrusion Specification HSE 75mm PET/PP High Speed Extruder
Material
PP; PET and Other Rigid Sheet Polymers
Power Consumption
IR Ceramic Efficient for Energy Saving;
~0.26kWh per kilo Power Consumption
Layers
Single Extrusion Mono Layer or Co-extrusion Multi Layers
Production
Sheet Cut; Reel Wind; In-line with Thermoforming Machine
Thickness
PP: 0.3mm ~ 2mm; PET: 0.15mm~1.2mm
Width
500 ~ 1,600mm
Screw Dia
75mm
Maximum Screw Revolution
1000 RPM
Maximum Output
900 kg/h +/- 10% for PP; 1200 kg/h +/- 10% for PET
Line Speed
Up to 60M/Min.
Cooling Rolls Stack
Down stack or Up stack configuration
Cooling Rolls Stack.
Down stack or Up stack configuration
Vertical, Inclined or Horizontal,
J Type, 3rd Roll Rotating type & Multiple Contact type for High Performance Requirements
Slitting
Razor Blades, Rotating Blades
Winder
Fixed Shaft; Cantilever; Automatic Cut and changeover Turret Winder
Drive System
CMG Drive with Hallow Shaft Design for Screw Extraction from Back Side